Call Now
commercial locksmith

Panic Bar Installation in Fort Worth, TX

Install or replace panic bars (crash bars, exit devices) at your Fort Worth business — required for egress on most commercial occupancies under IBC 1010.

Panic Bar Installation in Fort Worth TX

Panic Bar Installation — What You Get in Fort Worth

Install or replace panic bars (crash bars, exit devices) at your Fort Worth business — required for egress on most commercial occupancies under IBC 1010. Our licensed technicians cover all of Fort Worth — from the Cultural District and Sundance Square out to Alliance Town Center and Camp Bowie. Licensed and insured, BHMA-rated hardware, IBC code-compliant installs.

Service Includes

Von Duprin 99, 33A, 35A, Sargent 80 Series, Yale 7000
Rim, surface vertical rod, concealed vertical rod, mortise
Fire-rated (UL 10C) and non-fire-rated options
Trim options — escutcheon, lever, knob, alarm
IBC 1010 and ADA compliant 5 lb max activation force
Texas Fire Code compliant installation with documentation

Frequently Asked Questions

How much does a panic bar cost installed in Fort Worth?

A Detex Advantex W70 rim device installed runs $475-$725. A Von Duprin 99L-F with lever trim runs $1,200-$1,800. Surface vertical rod (double-door) sets run $1,800-$3,200. Fire-rated UL 10C devices add $200-$400 because the labeled hardware costs more.

Does my Fort Worth business need a panic bar?

Per International Building Code Section 1010.1.10 (adopted by City of Fort Worth), Group A (assembly), E (educational), and H (high hazard) occupancies with 50+ occupants require panic hardware on egress doors. Group B (business), F (factory), M (mercantile) require it at 100+ occupants. Your CO or fire inspector will flag it; we install to spec.

Can I keep a panic bar locked from the outside?

Yes — that is normal. Panic bars allow free egress (5 lb push) but the outside trim can be keyed, locked solid (no outside entry), or use an electric strike. Adding a Von Duprin LDD (Less Dogging Device) or fire-rated dogging confirms it cannot be propped open in violation of fire code.

How long does panic bar installation take?

A standard rim device on a single door takes 90-120 minutes including strike modification. Surface vertical rod on a double-door pair runs 3-4 hours. Concealed vertical rod retrofits where the door is already prepped run 2-3 hours; new prep on a non-prepped door is closer to 4-6 hours and we usually quote a return visit.

Request a Quote

Tell us where you are and what you need — we'll come back fast.

Or call directly · (817) 674-3595

Dispatch · 24/7 · Fort Worth TX

Need a Fort Worth Locksmith?

Our licensed technicians cover residential, commercial, and automotive jobs 24/7. Lockouts, rekey, deadbolts, smart locks, master key systems, panic bars, car keys.